Mac pro optical drive replace

Getting started. This is what this how-to covers: Removing both the optical drive and hard drive in the MacBook Pro; Placing the laptop's hard drive in a bracket and installing it where the optical drive used to be; Installing a new solid-state drive SSD in the laptop's hard drive compartment, which makes the SSD as the primary drive. Chris Barylick A second 2.

Choose a drive that works best for you.

Install a 5th Drive Into the Mac Pro

You can add a second hard drive so you can have more storage space. If you add a SSD, you'll breath new life into your laptop, because the speed and responsiveness of the SSD as the primary drive will help your MacBook Pro's overall speed. A driver set with a small Phillips head screwdriver as well as a Torx 6 driver. Step 1: Open the laptop Photo: Step 2: Disconnect the battery Photo: Chris Barylick Remove the bottom plate, put it to the side and disconnect the battery before you proceed.

Step 3: Step 5.

All replies

Step 6. Almost done! To reassemble your device, follow these instructions in reverse order.

You're Finished! Author with 3 other contributors.

• mac os reset password without cd.
• the mac and pc centre.
• Optical Drive Connector;
• Trying to replace my internal SATA optical drive with USB 3 ports on a Mac Pro.
• Mac Pro First Generation Optical Drive Replacement?

Derek Chan Member since: It had been a long time since I'd been inside my towers! Did you take off the front of the tray? Single Step Full Guide.

• How to Upgrade Mac Pro Optical Drive: agfox.com?
• Mac Pro Storage Upgrade Guide.
• foscam ip camera setup mac.
• photoshop not enough ram error mac?
• recover mac drive from windows?

Small - px Medium - px Large - px. View Statistics: Past 24 Hours: I just got a brand new mac pro. I opened the cd drive with the eject button on the keyboard, and then went to close it the same way, the cd drive goes in, but the metal gate doesn't come back up. What can i do? I had this problem, too.

Optical Drives

I was able to fix the problem by pushing on the hinges, as shown below. In the image, you can see the cover hidden behind the outer "mesh" of the case, below the CD tray opening. It is supposed to snap back up from there when the CD tray hits those little hinges. Sometimes it gets gummed up, and it just needs to be nudged a bit to snap back up.

You have a couple options, depending on how stuck it is....

If you are unable to nudge it out of place, it's likely really stuck. You'd probably want to remove it from the case and examine it. It might need cleaning: