Radeon 5770 mac pro 4 1

I'll keep you posted if I flag any issues going forward. From the earlier comment I wasn't sure you had actually tried to update the firmware with only the RX installed, since with High Sierra the update required a mac ROM card. And I think the lack of boot video until the setup starts which can take a long time may also have some aborting the update.

Apple mentions that in the install guide, I made that note red text in above copy. I knew you won't see the apple logo when you press power button. The solution is you have to select the target disk as normal boot first and restart your computer. Don't freak out with blank screen, it will take a while till you will see the setup screen. Then you can erase disk on "Disk Utility", and then I started to install So the firmware update went OK with only RX installed?

What is your Mac Pro bootrom version after the The issue that I found is WiFi Hardware showed not installed and it's completely die. See below. If no Wi-Fi, maybe no Ethernet also. Link now has a copy. Also heard Atheros not supported in Mojave. And there's Mojave threads here and here where other Mac model owners, including a Mac Pro have reported no WiFi hardware after the I wonder if the It was out in beta the day after I'm happy to say that things have gone smoothly with just a couple small wrinkles.

The first wrinkle occurred while updating from Sierra to High Sierra. Once this firmware update was applied I installed High Sierra and applied all the updates from the App Store.

Navigation menu

I then put my Radeon RX back in and things worked well over the last week. The second wrinkle happened during the Mojave upgrade. Upon running the installer again I got the notice that my machine needed a Metal compatible video card. It turns out there was no need to swap the Radeon for the GT in to run this Mojave firmware update.

Odd boot rom version, normally has MP51 prefix. Can you confirm? Since my initial report I've also updated my machine at home, which is nearly identical to my work Mac Pro it has a Xeon W 3.

They both use the same Fusion drive arrangement and Radeon RX One other note for those interested. While it's too early to know for sure, so far things are running smooth and I've seen no issue with the update. Unfortunately I didn't think to check either system's Fusion drive partition map type before updating from I would guess the partition map type was GPT, but that's only a guess. I don't have any other Fusion drives to compare that are still on High Sierra. I want to confirm that the Mojave I just got a message saying Mojave required a Mac with a Metal compatible video card. As you note, I was running the Mojave installer on The firmware update on my home machine also ran fine with the Radeon RX installed.

I didn't bother swapping my GT on my home machine during the Mojave update. Let me know if you have any further questions. So far I haven't had any issues with either machine. I've been using the card first with High Sierra and now Mojave. Once you get used to the lack of a boot screen less problematic than I imagined it might be - there is a Mac Pro Boot ROM update required again for Mojave and unlike the one with High Sierra this was even possible with the RX installed it really is a great choice for these machines, reasonable power consumption, never gets loud and good p performance in games the only title I can't run is Mafia 3 but that appears to be it not liking dual CPU machines as single socket owners can run it.

Thanks to Apple using the same card in their development box for eGPUs and the same chipset in the iMac it is really well supported. I had the card on back order for many months after I first read about it being an option this was after the iMac 5K with the same chipset was announced because of the all the cryptocurrency miners. The main reason at the time for me upgrading was for the game F1 The GTX worked very well for that game but I did find the fan on the Nvidia card noisy under heavy load.

When F1 arrived it wasn't stable with the GTX With Apple only making Macs with AMD and Intel graphics since Nvidia support is only via web drivers for newer cards and with the OpenGL to Metal transition and some titles supporting one card and the next titles not getting a suitable GPU has been like ping pong!

An 8-pin to 6-pin adaptor was included with that and apart from the load lights on my UPS being maxed out when the card was worked hard I never actually had a problem myself but some folks have had machines power off with these under the most extreme loads. The RX has a much lower draw and I'm only using a single p display. I picked this capacity as it was the largest without a fan.

Some early RX reports have notes on power usage, but nothing extensive. I was concerned about one report that tried using all 5 card outputs at once, but only short term I think.

Not sure I'd have done that. To date, no other reports of problems like that, but YMMV. With some high end cards, an external power supply really is required. And I understand the concern about a single cable 6-pin to 8-pin adapter, but the standard RX uses both Mac Pro 6-pin to the card's single 8-Pin connector. In the past I have heard of shutdowns, including overheating problems from broken Northbridge heat sink retainers. I still wonder if the reader that was using a GTX and ATI Card both use two 6-pin aux power connections back in ever had a failure.

Of course that's an old card, but it wasn't a lightweight. I saw a max total system power draw on my dual 2. They have another page on multi-monitor usage. With the delays I actually almost cancelled the RX a few times but when it did arrive I ended up with an amazing price thanks to the Amazon pre-order lowest price deal they run. The RX has a single 8-pin power connector and the Pulse version doesn't come with cables so you need a Y cable i.

Logic Pro Help

I agree. Some of the early RX reports below before Mojave include notes on Aux power cables, with links to Amazon. As long as you have a version of MacOS new enough to have the RX drivers built-in it really is plug and play. The card is a slightly tighter fit the PCI-E slot above mine is empty but you might struggle with a large card there.

Certainly it really should keep me going until I can see what Apple finally come up with for the next Mac Pro design. I never thought nearly a decade ago I'd have so much value out of this machine that is for sure! Best regards, Matthew" Thanks Matthew. A simple design, upgradeable workhorse not a closed work of art. Gave up on it happening though.

Hopefully the 'modular Mac Pro' will at least have user replaceable parts. Installing the final release of Mojave Monday, September 24th. Earlier reports and comments below are from before macOS Mojave was released. Some Mac Pro 4,1 owners had flashed their bootrom to 5,1 for support of later macOS versions. However Mojave install reports above confirmed that the no Mac rom Radeon RX cards worked for the install and firmware update although no display until the driver loads.

I have tried everything but a clean install and may eventually do so, but my prime request of you is if you are getting any feedback on people with the users either having success or failure. Have macOS See reports above confirming this - including firmware updates applied with only the Radeon RX card installed. No help from the cardmaker - they tried to say the card would not work on a mac. If HDMI, is the cable certified for use at that resolution? Screen blanking out can be a handshake or cable issue. HDMI 2.

There are cheaper cables than the Blackweb ones I bought, but they were on sale in a local store for easy return if need be. Earlier reports below from April 30th , April 20th , March 2nd , Feb. I'm running a Mac Pro 5. So far everything appears to be functioning very well, but to date, I've only tried two monitors. The next challenge will be upgrading if possible to Mac OS Apparently, not sure for Mac Pro 5. Time will tell if that's also required for Mojave, but see the reply to Mojave Beta install problems above for tips if it is. Older comments follow. I saw an early post in Apple's forums that the There's been 6 dev Betas as of early August.

Unless he also had another card installed. Checked my bookmark for that thread and it now shows "access denied". Hopefully there will be DIY installer script mods in the future to work around install problems. The video topics page has info from where there was some confusion or mfg mistakes? This recent owner Apple forum post mentioned checking switch positions. What i was told and what worked for me was if you have a and it boots pre-high sierra with the switch in 1 position, move the switch to the other position before trying to install.

High Sierra yup it's got a switch on the side. See link above.

Radeon HD 5770 compatible with 2009 Nehalem Mac Pro?

Or it won't install. Don't ask me why - as Grant bennett alder said it probably has to do with the firmware install and update, which is built into the installer and you can't get around. Alternatively, you could dust out your card, install High sierra, then after It has installed, try it with the new card I am running a Mac Pro 5,1, 12 core, with dual Intel x Xeons.

I had been running a Radeon which was flashed for Mac. While I had fine results with that card, I have been wanting a 3rd monitor, and my would only support two, as it was a PC version that had been flashed for the Mac. I have not yet connected the third monitor, but monitors 1 and 2 are working fine with the new card. I had to do absolutely no configuration to get it working in OS It did not show a Mac boot screen until partway through the boot-up process, but this was to be expected.

He claimed he had under 30 hours on it. Performance numbers are very good. I hit 53 and change fps in Cinebench. My Geekbench multi core score improved to over 20, for the first time. I suspect adding the 3rd monitor will present no issues. I am currently using 1 monitor in a display port and 1 in HDMI.

I do not do anything requiring 4K work, so I only have have p monitors. But the 3rd screen will greatly increase my workflow in music production, so I am quite pleased. There was an image but it didn't make it through. Fourth report , added April 20th. Earlier reports below on March 2nd , Feb. That particular edition is the fastest version as it's factory overclocked MHz.

There are no sleep problems either, everything works fine on the latest High Sierra However, I have a very useful hint for anyone who considers this card. After the install everything seemed fine but after some heavy testing I had the safety shutdown situation when running the notorious FurMark benchmark. The card was connected with the same power cables as my HD one 6-pin to 6-pin and the other 6-pin to 8-pin.

That worked for years without any problem on the old card. However, that was not necessary! The problem was that for some reason this card is not using 6-pin and 8-pin power inputs in a balanced manner. So, two separate cables are not the solution. What you have to do is to completely ignore 6-pin input on the card and use only 8-pin with a splitter to 2 x 6-pin on the motherboard. And voila! Everything works smooth! I'd be leery of just using only the 8-pin connector on the card, but let me know if you see any problems long-term.

• install windows 7 bootcamp on mac.
• Mac Pro 4,1 ATI Radeon HD | MacRumors Forums.
• How to get 3 displays to work on a Mac Pro [SOLVED] - Logic Pro Help.
• youtube not working on mac mountain lion?

I measured the power consumption with Marcel Bresink's Hardware Monitor and the card is idling at only 7. Then, I pushed the card very hard with the FurMark test and it passed the benchmark flawlessly. So, everything seems within specifications that we expect and I guess it's reasonably safe. In the end, I can only comment that those Mac Pro towers are the best Macs ever built. I hope Apple will come to senses with 7,1. Best, Davor. Thanks Davor. How's the performance vs your Radeon HD ? From your comments, Hardware Monitor works in He posted a notice last April about Apple and software like HM.

It was long in the tooth for doing any serious high-res production work, though most of my archive and personal stuff was on it along with a lifetime of drives connected which always kept me from moving to the newer hardware SO much TLC went into this rig over the years I was excited to breathe new life into it! I run the 4K display at x to match the Cinema Display but it will easily run at its x native resolution. But can you use all 5 of those ports simultaneously?

Default and Best Mac Pro Video Cards/Video Card Upgrades: agfox.com

Many cards have limits. The tech specs for this particular card http: Photo Credit: Apple, Inc. Mac Pro. If you're not certain which Mac Pro you have, all Mac Pro lines can be identified "closely enough" by the Model Identifier in software to determine the default video card as well as confirm compatibility with aftermarket video cards.

The EMC number is listed on the rear of the system in small type. More details about specific identifiers are provided in EveryMac. Information on the default graphics cards -- as well as original options available via custom configuration -- are provided on the EveryMac. However, default Mac Pro video cards for each series, as well as the ports provided by each video card, also are provided below for your convenience:. At the time of purchase, each Mac Pro could be configured with at least one higher performance video card as an optional upgrade.

Of course, it always is possible to purchase one of the higher performance video cards that was offered with a particular Mac Pro after the initial system purchase. For the original Mac Pro models, this is your only readily available option without hacking the system by also installing a newer, officially unsupported, version of OS X. These all are intended to work with the Mac Pro either with default OS X support or with provided drivers:. The other video cards above are compatible with the "Early " and "Early " as well as the "Mid" and "Mid" Mac Pro models.

The excellent BareFeats has various " shootouts " that compares several of the above video cards with one another as well as stock Mac Pro video cards that are well worth reviewing. Site sponsor Other World Computing sells a selection of Mac Pro compatible video cards including default options, video cards that originally were offered as custom configurations, and some aftermarket options listed above. Upgraded the video card in your Mac Pro?